Have finally got something done on the old VW Karmann Ghia chassi. Its being converted from swing axle to a better independent rear suspension. It’s just mocked up and tack welded at the moment, test fitted the new rear discbrakes. The fork/frame have been clearanced for Porsche 5speed 901 transmission and also reinforced, welded all around. Probably I will reposition the IRS brackets further in, and mount the trailing arms on the inside of the springplates. Then I will get about 1″ more space against the outer wheel arch and can then fit wider tires. Driveshafts need then be shorter also of course, the left VW type 3 automatic driveshafts are shorter and would be perfect or buy new shortened EMPI’s. Next up is to fabricate front transmission mounts and 911 (or maybe VW) gear linkage.
Designed in Italy by Ghia carosserie, built by Karmann in Germany for Volkswagen.
The best from two worlds, Porsche 911 and VW Karmann Ghia.
My 1967 Ghia gets a complete overhaul of the frontend. It was all stock height but the front is a little to high for my taste, it needs to be lowered around 50-100mm to get the beauty lines of the car to really flow. Rear is stock height. A brand new adjustable 2″ narrowed front beam with needle bearings. New narrowed tierods, new droppen spindels, new wheelbearings, new shocks, and all the brakestuff was already new. Wheels will be polished Porsche Fuchs. Since I had to remove the fuel tank I installed new fuel lines and cleaned up the front luggage compartment a little. Here comes some pics…
